Comparing PVC vs ABS
In the world of plastics, there are many types of materials that are available. The main plastics are PVC and ABS (some are considering PMMA for the time being, but the main products are still PVC and ABS).
We are receiving many questions about the difference between two materials.
| Parameter | PVC | ABS |
|---|---|---|
| Environment | PVC can be recycled; however, burning PVC can expose harmful gas to the environment. PVC takes longer time than ABS to be decomposed. | ABS is considered to be the ‘Green’ because it can be recycled. However, the recycling can be done by burning the material also, no harmful gas is exposed. ABS takes shorter period of time to decompose in the ground. |
| Resistant to Fire | PVC is also resistant to fire, however, in case of fire, the gas exposure is risky and unhealthy. | ABS more resistant to fire. Even if there is fire, the exposure of harmful is limited. C |
| Durability | PVC is more resistant to solvent and UV lights. It is possible to use the strongest form of solvent. | ABS can be damaged if a strong solvent is used. ABS is less resistant to lights. However, at Young, we are using the best pigment to have the better results. |
| Costing | PVC is cheaper than ABS and other plastic materials. | ABS is the most expensive edgebanding solution in the plastic segment. |
| Processing | PVC is a good product for all sorts of edgebanders. However, due to its strong composition, it is little harder to process than ABS in edgebanders. | It is more convenient to process ABS on edgebanders. The lifetime of trimming knives of the edgebanding is longer. Only be careful with the selection of solvent to be used for cleaning. |
| Availability | At Young, both products are readily available. For PVC, our capacity is high, minimum order requirement is higher. | For ABS, we have one advantage which is we have a smaller line whom we can supply lesser quantity. |
| For laser edgebanding | If PVC is burned, the exposure of the gas is harmful. Therefore, for laser, or airtech technolody, PVC cannot be used. | ABS is the perfect product for laser technology due to its resistant to fire and also when burned, there is not harmful gas. It is only recommended to used minimum thickness of 1mm for laser edgebanding processed. |
| Color strength | At Young, we use the same technology of printing for PVC as well as ABS. So they are both on the same level. | For ABS, we are using the highest quality of pigments to avoid any yellowing or fading issue on plain colors. |
| Dimensions | In PVC, thickness between 0.4mm and 3mm is possible. The width can be between 18mm and 610mm | In ABS, thickness between 0.4mm and 2mm is possible. The width can be between 18mm and 150mm |
For more information or to receive samples in both products, please get in touch with us.